强耦合腔-QED系统中原子的纳秒脉冲激发光谱研究

本文在多原子强耦合腔-QED系统中,利用脉冲宽度为5 ns的强脉冲光在垂直于腔轴方向直接激发原子,脉冲的峰值功率为40 mW,通过光学腔观测激发原子辐射到腔中的光子获得相应的激发光谱。我们发现当光场频率和原子跃迁失谐±80 MHz时原子激发率达到最大,而在共振时原子激发被抑制。我们建立了脉冲光与三能级原子相互作用的模型,通过缀饰态能够解释此现象。     

Design of sextuple-mode triple-ring HTS UWB filter using two-round interpolation

A single-stage ring resonator capable of introducing six modes within the ultra-wideband (UWB) passband is presented. The sextuple-mode resonator consists of three rings and three sets of stepped-impedance open stubs. Based on this sextuple-mode resonator, a UWB filter fed by the interdigital-coupling line (ICL) is designed. And we propose a two-round interpolation method to obtain the filter's initial dimensions. The designed filter is fabricated on a double-sided YBCO/MgO/YBCO high-temperature superconducting (HTS) thin film for demonstration. The experimental results show that this UWB filter produces eight resonances in the passband eventually, which effectively improves the in-band reflection and the band-edge steepness. Moreover, the upper stopband performance is enhanced due to the transmission zeros (TZs) generated by the stepped-impedance open stubs and the ICL structure. The measured good performance verifies the practicability of the two-round interpolation approach, which can also be extended to other odd-even-mode filter designs.     

GaN单晶衬底上同质外延界面杂质的研究

氮化镓单晶衬底上的同质外延具有显著的优势,但是二次生长界面上的杂质聚集一直是困扰同质外延广泛应用的难题,特别是对电子器件会带来沟道效应,对激光器应用会影响谐振腔中的光场分布。本文通过金属有机化合物化学气相沉积(MOCVD)生长的原位处理,实现了界面杂质聚集的有效抑制。研究发现,界面上的主要杂质是C、H、O和Si,其中C、H、O可以通过原位热清洗去除;界面Si聚集的问题主要是由衬底外延片保存过程中暴露空气带来的,其次是氮化镓衬底中Si背底浓度,在外延过程中,生长载气对氮化镓单晶衬底不稳定的N面造成刻蚀,释放的杂质元素会对二次生长界面产生影响,本文较系统地阐明了界面杂质的形成机制,并提出了解决方案。     

水化硅酸钙纳米压痕分子动力学模拟方法优化

针对水化硅酸钙纳米压痕模型忽视了压头与基底之间相互作用的问题，由尺寸差异引起的金刚石压头难以计算的问题，以及Wittmann模型无法得到实际接触面积的问题，提出了新的模型与计算方法．结合分子动力学方法，采用金刚石压头-Wittmann模型基底的组合方式构建无定形态水化硅酸钙纳米压痕试验模型．在建模阶段，考虑到压头模型与基底模型粒子间尺寸差异，提出了等比例替换模型，通过公式推导并就不同尺寸模拟结果验证了等比例替换模型的可行性．在计算阶段，提出了局部前处理的弛豫方法进行模拟．确定最大荷载位置处的接触面积为546 nm2，进而求出水化硅酸钙模型硬度H为0.84 GPa、折合模量Er为30.52 GPa．并通过纳米压痕试验，验证了模拟结果的准确性，证明了模型的科学性，对今后水化硅酸钙(C-S-H)纳米层面的模拟具有重要借鉴意义．     

Enhanced thermoelectric performance of PEDOT:PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.     

求解一维定常对流扩散反应方程的混合型紧致差分格式

借助显式紧致格式和隐式紧致格式的思想,基于截断误差余项修正,并结合原方程本身,构造出了一种求解一维定常对流扩散反应方程的高精度混合型紧致差分格式.格式仅用到三个点上的未知函数值及一阶导数值,而一阶导数值利用四阶Pade格式进行计算,格式整体具有四阶精度.数值实验结果验证了格式的精确性和可靠性.     

基于DEA-ANP的快递企业绩效评价研究

在建立快递企业绩效评价模型时,提出了利用DEA和ANP相结合对快递企业绩效进行评价的方法.不同于之前研究,文中提出的方法使用ANP替换AHP,充分考虑了物流行业的"效益背反"现象.其解决了AHP确定权重时,无法体现元素之间关联性的问题,单独使用DEA评价时,无法考虑决策者偏好的弊端.首先,方法基于.ANP方法,求出每个指标的权重,再分别对每个因素使用DEA方法求出各系统的相对效率值;然后,将各指标权重和相对效率值结合,求出各快递企业中营业部的整体效率值并进行排序;最后通过实例分析,验证了此方法的实用性、可操作性及优越性.